Agilent N8975A Option K40 Blockdown Converter Operating and Service Manual N8975-90002 [47] free download

File name N8975A Option K40 Blockdown Converter Operating and Service Manual N8975-90002 [47].pdf

Operating and Service Manual Special Supplement Agilent Technologies N8975A Option K40 Blockdown Converter This manual provides documentation for the following instrument: N8975A Option K40 Manufacturing Part Number: N8975-90002 Printed in USA December 2012 Revision E Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Safety Information The following safety notes are used throughout this manual. Familiarize yourself with each of the notes and it's meaning before operating this instrument. WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met. CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in damage to or destruction of the instrument. Do not proceed beyond a caution sign until the indicated conditions are fully understood and met. WARNING This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the power cord). The mains plug shall only be inserted in a socket outlet provided with a protected earth contact. Any interruption of the protective conductor inside or outside of the product is likely to make the product dangerous. Intentional interruption is prohibited. 2 WARNING The power cord is connected to internal capacitors that may remain live for 5 seconds after disconnecting the plug from it's power supply. WARNING The detachable power cord is the instrument disconnecting device. It disconnects the mains circuits from the mains supply before other parts of the instrument. The front panel switch is only a standby switch and is not a LINE switch (disconnecting device). WARNING The opening of covers or removal of parts is likely to expose dangerous voltages. Disconnect the product from all voltage sources before starting to open. WARNING These servicing instructions are for use by qualified personnel